Mechanical group

The frame can be equipped by a  mechanical gruppo.

Carbon dropout.

Carbon dropout.

ULTRA THIN SEAT STAYS

Ultra Thin Seat Stays- The smaller seat-stays reduce weight and do not compromise the strength and stiffness of the frame.

Tapered Head Tube

Differential head tube: surfaces are perfectly “integrated” in between head tube and fork.

4 Peaks Rear

The particular trapezoidal design allows for a stiffer and stronger structure of the entire frame.

UD carbon

Outer skin in UD carbon.

Monocoque frame

Monocoque carbon frame

S-DAMPING SYSTEM

S-Damping System- The “S” design of the seatstays eases vibrations caused from collisions with the ground and favour the fatigue life of the structure and the comfort of the seat.

BSA bottom bracket set

Frame with BSA bottom bracket set.

Fondriest Bicycle Frames (R30 model) - Albabici Cycling Products

TAPERED HEAD-TUBE

Steering differentiated from 1-1/8" above to 1-1/2" below and providing high torsional stiffness.

Fondriest Bicycle Frames (R30 model) - Albabici Cycling Products

4 PEAKS REAR

The particular four peaks rear structure provides better stiffness values and more frame fatigue strength.

Fondriest Bicycle Frames (R30 model) - Albabici Cycling Products

S-DAMPING SYSTEM

After careful and severe simulations, a particular "S" line of seat-stays for this frame has been developed, which can ease vibration levels on the seats and therefore maximise performance and comfort.